ZDX V6-3.7L (2010)
10. If necessary, release the hooks (A) and pull the belt guide trim (B), then remove it.
11. Install the seat belt and the buckles in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions See: Testing and Inspection.
-
Apply medium strength liquid thread lock to the retractor mounting nut before reinstallation.
-
Assemble the washer on the center anchor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the seat belt.
-
Tighten the nut and the bolts by hand first, then tighten to the specified torque.