ZDX V6-3.7L (2010)
2. Connect the E-pretensioner connectors (C) to the E-pretensioner unit.
3. Install the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center Console
Removal/Installation.
4. Install the front seats See: Body and Frame/Seats/Service and Repair/Front Seat Removal/Installation.
5. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
6. Clear any DTCs with the HDS See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
7. Check the operation of the E-pretensioner unit with the HDS See: Testing and Inspection.
8. Confirm proper SRS operation: Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and check that the
SRS indicator comes on for about 6 seconds and then goes off.
