ZDX V6-3.7L (2010)
-
If there is battery voltage, go to step 8.
-
If there is no voltage, check for:
-
A blown No. 23 (15 A) fuse in the driver's under-dash fuse/relay box.
-
A faulty console accessory power socket relay.
-
A faulty driver's under-dash fuse/relay box.
-
An open in the wire between console accessory power socket terminal No. 1 and driver's under-dash fuse/relay box connector P (20P) terminal
No. 1.
8. Check for continuity between console accessory power socket 2P connector terminal No. 2 and body ground. There should be continuity.
-
If there is continuity, replace the power socket; go to step 9.
-
If there is no continuity, check for:
-
Poor ground (G403).
-
An open or high resistance in the ground wire between console accessory power socket 2P connector terminal No. 2 and ground (G403).
9. Remove the socket (A).
10. Remove the housing (A) from the panel.
11. Install the power socket in the reverse order of removal.
