acura Workshop Repair Guides

Acura (Honda) Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Relay Box: Service and Repair
Passengers Under-Dash Fuse/Relay Box (Passengers MICU) Removal and Installation

Passenger's Under-dash Fuse/Relay Box (Passenger's MICU) Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations  See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or servicing.

Removal

1. Do the battery terminal disconnection procedure  See: Battery/Service and Repair/Procedures.

2. Remove the passenger's kick panel  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim

Removal/Installation - Pillar Areas.

3. Disconnect the connectors from the passenger's under-dash fuse/relay box (A).

4. Loosen the mounting bolt from the lower side of passenger's under-dash fuse/relay box.

5. Remove the mounting bolt from the upper side of passenger's under-dash fuse/relay box, and remove the passenger's under-dash fuse/relay box.

Installation

1. Install the relays and connect the connectors to the passenger's under-dash fuse/relay box, then install the passenger's under-dash fuse/relay box in

the reverse order of removal.

2. Install the removed parts in the reverse order of removal.

3. Do the battery terminal reconnection procedure  See: Battery/Service and Repair/Procedures.

4. Confirm that all systems work properly.

Starting and Charging > Power and Ground Distribution > Relay Box > Component Information > Service and Repair > Under-Hood Fuse/Relay Box Removal and Installation > Page 3916

< PREV PAGE NEXT PAGE >