ZDX V6-3.7L (2010)
Acceleration Sensor: Service and Repair
Vertical Acceleration Sensor Replacement
NOTE: This vehicle has one front vertical acceleration sensor and two rear vertical acceleration sensors on both right and left sides.
Front
1. Press the engine start/stop button to select the OFF mode.
2. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
3. Detach the harness clip (A) and the connectors clip (B) from the bracket (C) to gain easier access to the vertical acceleration sensor.
4. Disconnect the vertical acceleration sensor 3P connector (A).
5. Remove the sensor mounting nuts, and pull out the vertical acceleration sensor (B).