ZDX V6-3.7L (2010)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
Front Damper/Spring Removal/Installation
Front Damper/Spring Removal and Installation
NOTE: Except where called out, the illustrations show without active damper system.
Removal
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the front wheel.
3. With active damper system: Disconnect the damper coil 2P connector (A), and remove the flange bolt (B), and detach the harness clip (C).
NOTE: Be careful not to damage or contaminate the connector.
4. Remove the wheel speed sensor harness (A) and the brake hose (B) from the damper (C). Do not disconnect the wheel speed sensor connector.
5. Remove the flange nut (A), while holding the joint pin (B) with a hex wrench (C), and disconnect the stabilizer link (D) from the damper.
