ZDX V6-3.7L (2010)
6. Remove the damper pinch bolts (A) and flange nuts (B) from the damper.
NOTE: Do not allow the knuckle to rotate too far outward. This may allow the driveshaft inboard joint to come apart.
7. Remove the service caps (A).
6. Remove the damper pinch bolts (A) and flange nuts (B) from the damper.
NOTE: Do not allow the knuckle to rotate too far outward. This may allow the driveshaft inboard joint to come apart.
7. Remove the service caps (A).