acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

A/T Gear Position Indicator Replacement|Page 3030 > < A/T Gear Position Indicator Replacement|Page 3028
Page 1
background image

Shifter A/T: Removal and Replacement
Paddle Shifter Replacement

Paddle Shifter Replacement

SRS components are located in this area. Review the SRS component locations  See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repair or service.

1. Remove the steering wheel  See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel

Removal.

2. Remove the four screws (A) securing the steering wheel rear cover (B).

3. Pull the snap-fit portion (C) up carefully, then remove the steering wheel rear cover.

4. Remove the paddle shifter connector (A) from the clamp bracket (B), and disconnect the paddle shifter connector.

A/T Gear Position Indicator Replacement|Page 3030 > < A/T Gear Position Indicator Replacement|Page 3028