ZDX V6-3.7L (2010)
Is there battery voltage?
YES -
Replace the cable reel See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair.
NO -
Go to step 10.
10. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
11. Jump the SCS line with the HDS.
12. Disconnect PCM connector A (49P).
13. Connect dashboard wire harness 20P connector terminal No. 15 to body ground with a jumper wire.
14. Check for continuity between PCM connector terminal A36 and body ground.
Is there continuity?
