ZDX V6-3.7L (2010)
Transmission Mount: Service and Repair
Lower Transmission Mount Removal and Installation
Removal
1. Remove the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement and the engine undercover
See: Body and Frame/Splash Guard/Service and Repair/Engine Undercover Replacement.
2. Lift and support the engine with a jack and a wood block under the transmission.
3. Remove the lower transmission mount mounting bolts (A).
4. Remove the lower transmission mount (B).
Installation
1. Install the lower transmission mount (A), then tighten the lower transmission mount mounting bolts (B).
2. Loosely install the lower transmission mount mounting bolt (C).
3. Remove the jack and the wood block.
4. Tighten the lower transmission mount mounting bolt.
5. Install the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement and the engine undercover See:
Body and Frame/Splash Guard/Service and Repair/Engine Undercover Replacement.
