ZDX V6-3.7L (2010)
Transmission Cooler: Removal and Replacement
ATF Cooler Replacement
1. Remove the front bumper See: Body and Frame/Bumper/Front Bumper/Service and Repair.
2. Remove the ATF cooler mounting bolts (A), and disconnect the ATF cooler hoses (B), then replace the ATF cooler (C).
3. Connect the ATF cooler hoses See: Fluid Line/Hose/Service and Repair.
4. Install the ATF cooler.
5. Install the front bumper See: Body and Frame/Bumper/Front Bumper/Service and Repair.
6. Check the ATF level See: Service and Repair/Procedures/ATF Level Check.