ZDX V6-3.7L (2010)
15. Remove the rear fixed glass panel.
16. With a sponge, apply a light coat of glass primer along the edge of the rear fixed glass panel (A) as shown, then let the primer dry for at least 10
minutes:
-
Do not apply body primer to the panel, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the panel properly, causing a leak after the panel is
installed.
-
Do not allow water, dust, and abrasive materials to contact the primed surfaces.
