ZDX V6-3.7L (2010)
20. Use suction cups to hold the rear fixed glass panel over the opening, align it with the alignment marks made in step 14, and set it down on the
adhesive. Lightly push on the panel until its edges are fully seated on the adhesive all the way around.
NOTE: Do not open or close the doors for about an hour until the adhesive is dry.
21. Scrape or wipe the excess adhesive off with a putty knife or shop towel. To remove adhesive from a painted surface or the rear fixed glass panel,
wipe with a soft shop towel dampened with isopropyl alcohol.
22. Reinstall the bolt securing the antenna bracket.
23. Reinstall the AM/FM/XM antenna See: Accessories and Optional Equipment/Antenna/Antenna, Radio/Diagrams.
24. After the adhesive has dried, spray water over the rear fixed glass panel and check for leaks. Mark leaking areas, and let the panel dry, then seal
with sealant. Let the vehicle stand for at least 4 hours after panel installation. If the vehicle has to be used within the first 4 hours, it must be driven
slowly.
25. Reinstall all remaining removed parts.
NOTE: Advise the client not to do the following things for 2 to 3 days:
-
Slam the doors with all the windows rolled up.
-
Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough, uneven roads).
