ZDX V6-3.7L (2010)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove these items:
-
Door panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Panel
Removal/Installation
-
Inner handle See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Panel
Removal/Installation
3. Remove the plastic cover (A).
1. Disconnect the power door lock actuator connector (B), and detach the harness clip (C).
2. Remove the plug caps (D).
3. Pass the wire harness (E) and the cables (F) through the slits (G) in the plastic cover, then remove the cover.
NOTE: If the plastic cover is damaged or torn, replace it with a new one.
4. If necessary, remove the screws, then remove the pull pocket bracket (A).
