Protection

Check

1. Install the four blocks securing the front wing.
2. Check parallelism, gaps and angles (this necessitates the installation of the mobile components

which were previously removed along with the gas-kets and parts which, when installed, will make it possible to check the success of the operation).

Protection

1. Spread the surfaces indicated in the illustration with Type A rust-proofing.
2. Apply Type A sealant to the areas indicated in the illustration.

1. Spread the Type B rust-proofing on the inside of the side panel as indicated in the illustration.
2. Move on to the painting phase.
3. Move on to the waxing phase
4. Move on to the foam treatment phase.