Test e
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Vehicle drifts during braking › Test e
BrakesTest e
TEST E
VEHICLE DRIFTS DURING BRAKING
TEST E
| TEST PROCEDURE | RESULT | CORRECTIVE ACTION | |
|---|---|---|---|
| E1 | CHECK TYRE PRESSURE |
●
●
|
Carry out step E2 Service to correct pressure |
| - Check that tyres are inflated to the correct pressure | |||
| E2 | CHECK SURFACE OF BRAKE PADS |
●
●
|
Carry out step E3 Clean and check pads; eliminate causes of trouble; replace pads if necessary |
| - Check for presence of grease, oil, mud or water on the surface of the pads | |||
| E3 | CHECK BRAKE PAD WEAR |
●
●
|
Carry out step E4 Replace pads and check calipers for proper operation; if necessary replace calipers |
| - Check pads installed on same axle for different wear | |||
| E4 | CHECK DISCS |
●
●
|
Carry out step E5 Replace discs |
| - Check that discs are of same manufacturer and dimensions | |||
| E5 | CHECK BRAKING REGULATOR |
●
●
|
Carry out step E6 Replace braking corrector if necessary |
| - Check that braking regulator is serviceable and correctly adjusted | |||
| E6 | CHECK CHARACTERISTIC ANGLES |
●
|
Adjust characteristic angles of wheels (see: GR. 21) |
| - Check that characteristic angles of the wheels are correctly adjusted | |||
Parts & tools for this job For 1992 Alfa Romeo 155
- PARTBrake padsSearch: Alfa Romeo 155 1992 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.