Test k
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Check led › Test k
Electrical 21B – Anti-theft deviceTest k
| TEST PROCEDURE | RESULT | CORRECTIVE ACTION |
|---|---|---|
| J1 CHECK LED - Disconnect the led D31 and check its operation (applying for example, 5 V to the terminals) |
OK | Carry out step J2 |
| NOT OK | Replace led D31 | |
| J2 CHECK CONTINUITY - Check for continuity between: - one of the terminals of the led D31 and earth G53b - the other terminal of the led D31 and pin A1 of control unit N45 |
OK | Replace the control unit N45 |
| NOT OK | Restore wiring between: - D31 and earth G53b (BLK) - D31 and pin A1 of N45 across pin A8 of connector G24 (BLK) |
TEST K
THE EMERGENCY KEY DOES NOT WORK
TEST K
| TEST PROCEDURE | RESULT | CORRECTIVE ACTION |
|---|---|---|
| K1 CHECK SWITCH - Check for correct operation of switch B97 - in the OFF position the contact between pins A1 and B is closed - in the ON position the contact between pins A2 and B is closed |
OK | Carry out step K2 |
| NOT OK | Replace switch B97 | |
| K2 CHECK CONTINUITY - Check for continuity between: - pin A1 of B97 and pin A4 of N45 - pin A2 of B97 and pin A7 of N45 - pin B of B97 and pin B13 of N45 |
OK | Replace the control unit N45 |
| NOT OK | Restore wiring between: - pin A1 of B97 and pin A4 of N45, across pin B1 of G241 (BLK) - pin A2 of B97 and pin A7 of N45, across pin B2 of G241 (BLK) - pin B of B97 and pin B13 of N45, across pin B4 of G241 (BLK) |
Parts & tools for this job For 1992 Alfa Romeo 155
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.