Engine overheating
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Engine overheating › Engine overheating
Engine cooling (V6)Engine overheating
ENGINE OVERHEATING
| TEST PROCEDURE | |||
|---|---|---|---|
| B9 | CHECK RADIATOR | RESULT | CORRECTIVE ACTION |
| - Check that the radiator is not encrusted and that it contains no foreign particles | |||
| B10 | CHECK COOLANT PUMP | RESULT | CORRECTIVE ACTION |
| - Check the condition and correct functioning of the water pump | |||
| B11 | CHECK THERMOSTAT | RESULT | CORRECTIVE ACTION |
| - Run the engine to operating temperature and touch the duct between the thermostat and radiator: check that it gradually heats up | |||
| B12 | CHECK THERMOSTAT | RESULT | CORRECTIVE ACTION |
| - Check the correct setting of the thermostat | |||
(CONTINUES)
Parts & tools for this job For 1992 Alfa Romeo 155
- PARTEngine gasket setSearch: Alfa Romeo 155 1992 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.