Helical springs
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Technical characteristics and specifications (2.4 V6) › Helical springs
Front suspensionHelical springs
Independent wheel suspension of the MacPherson type with negative off-set and anti-roll bar with pressurized telescopic hydraulic shock absorbers of the blade type, transversal swinging arms and off-set springs.
HELICAL SPRINGS
| CHARACTERISTICS | 2.4 V6 | 1.8 T.S. 2.0 T.S. |
|---|---|---|
| Inner diameter | 150 mm | 150 |
| Outer diameter | (mm) | 178 |
| Outther diameter | (mm) | 14 |
| Number of coils | 5.56 | 4.85 |
| Direction of coil | Right | |
| Free length | (mm) | 393 |
| Free length | (mm) | 386.5 |
SHOCK ABSORBERS
| Type: telescopic hydraulic pressurized blade type | Normal | C.D.S |
|---|---|---|
| Stroke | (mm) | 167 |
| Diameter of strut | (mm) | 22 |
| Controlled damping suspension solenoid valve power supply | (see: ELECTRICAL-ELECTRONIC DIAGNOSIS SECTION 31) | |
ANTI-ROLL BAR
| Diameter of bar | (mm) |
|---|---|
| 23 | |
GENERAL SPECIFICATIONS
FLUIDS AND LUBRICANTS
| APPLICATION | TYPE | NAME |
|---|---|---|
| Swinging arm flexible supports | GREASE | GREASE MOLYKOTE 7544 PG 54 TUTELA MR3 |
| Lateral steering tie-rods | GREASE | MOLYGUARD SYL113 |
Parts & tools for this job For 1992 Alfa Romeo 155
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Alfa Romeo 155 1992 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.