General specifications
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Technical characteristics and specifications › General specifications
Wheels and tyresGeneral specifications
GENERAL SPECIFICATIONS
TYRE ROTATION
FLUIDS AND LUBRICANTS
| APPLICATION | TYPE | NAME |
|---|---|---|
| Claw for fitting tyre to rim | FLUID | MILLOIL SC40/R MASCO 203SVA (*) (6 parts of water to 1 of fluid) |
CHECKS AND ADJUSTMENTS
DYNAMIC WHEEL BALANCING
Maximum residual imbalance permitted …………………… 10 g (5 per side)
Balancing weights …………………… 70 g max per side
(with no more than two weights per side)
● Locate the balancing weights on the edge of the rim.
● No not fit more than two weights per side.
● Two types of weights are used: one to be used on wheels with steel wheels and one for wheels with light alloy rims. Avoid mixing the two types.
● The wheel must be balanced each time a hole is repaired.
● The spare wheel must not be balanced.
Parts & tools for this job For 1992 Alfa Romeo 155
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.