Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo 159 Factory Service Manual (2005-2011)08 · Engine
08 · Engine

Connecting rod and piston set - r.r

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Pistons and connecting rods › Connecting rod and piston set - r.r
EngineConnecting rod and piston set - r.r

CONNECTING ROD AND PISTON SET - R.R

Operation 1028H10 · PISTONS AND CONNECTING RODS

1.9 JTS, 2.2 JTS

Removing

2.4 JTD 20V

- On this car, it is not possible to remove/refit the pistons with the connecting rods on the car.

To perform this operation, remove/refit the power unit

Op. 1004B10 POWER UNIT WITH MANUAL GEARBOX - R.R

and then work at the bench, customising the engine service procedures for this operation.

3.2 JTS

This operation can only be carried out with the power unit removed, therefore refer to:

Op. 1004B10 POWER UNIT WITH MANUAL GEARBOX - R.R

Op. 1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, DISMANTLE AND REASSEMBLE

Op. 1004D40 ENGINE - POSITION ON STAND AND REMOVE

Op. 1004E10 ENGINE, REMOVED - REMOVE CYLINDER HEAD AND OIL SUMP FOR INSPECTION - INCLUDES POSITIONING ON STAND AND REMOVAL

Op. 1004E20 ENGINE - DISMANTLE AND REASSEMBLE FOLLOWING OPERATION 1004E10 - WASH AND CHECK DISMANTLED PARTS - REFIT CYLINDER HEAD AND OIL SUMP - DOES NOT INCLUDE REPAIRS TO CYLINDER HEAD AND AUXILIARY UNIT

Parts & tools for this job For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.