BONNET LID OPENING CABLE - R R

Operation 7025A28 · BONNET LID

Removing

Op. 7025A24 BONNET LID OPENING LEVER - R+R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 7210E10 R.R. FRONT BUMPER

Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Release retainers (1a) of transmission cable (1b).

2. Fit a sensor to the end (2a) of the transmission cable (1b), then extract the transmission cable (2b), leaving the sensor in its place (to be used for reinserting the cable when refitting).

Refitting

- Check that the control cable is not damaged.

- Use the probe to reinsert the transmission cable in its seat.

Avoid bending the bowden cable or kinking it so that it could become deformed.

- Secure the bowden cable correctly to its retainers.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

Op. 7210E10 R.R. FRONT BUMPER

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 7025A24 BONNET LID OPENING LEVER - R+R