Supply hose to operating cylinder - r.r.
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Clutch release controls › Supply hose to operating cylinder - r.r.
SUPPLY HOSE TO OPERATING CYLINDER - R.R.
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
1. Raise the clip (1a) and disconnect the operating cylinder flexible supply pipe (1b), operating cylinder side.
Recover any brake-clutch fluid that emerges.
2. Undo the connector (2a) and remove the flexible supply pipe to the operating cylinder (2b).
Refitting
- Place the flexible supply pipe to the operating in its housing, connect it to the rigid pipe and tighten the connector to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Flexible supply pipe to operating cylinder | Connector | M12 | (Rigid pipe side) 1.7 - 1.9 |
- Connect the flexible pipe from the vibration damper to the operating cylinder, operating cylinder side and fasten it using the clip.
Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY
Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR
Parts & tools for this job For 2005 Alfa Romeo Brera
- PARTClutch kitSearch: Alfa Romeo Brera 2005 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Alfa Romeo Brera manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.