INTERMEDIATE FUEL VAPOUR PIPE R R

Operation 1080E50 · EVAPORATION CONTROL SYSTEM

3.2 JTS

Removing

Op. 1040E22 FUEL PIPE PROTECTION - R.R

Op. 1072B50 AIR CHAMBER - R.R.

1. Disconnect the rear rapid connector for the intermediate fuel vapour pipe.

- Release the intermediate fuel supply pipe from the underbody fastenings.

1. Undo the fixing nuts and move the engine coolant reservoir to one side.

1. Release the rigid section of the intermediate fuel vapour pipe (1a) from the fastening clips (1b) and remove it.

Refitting

- Place the intermediate fuel vapour pipe in position, secure it to the bodyshell using the clips and connect it to the rear vapour pipe.

- Place the engine coolant reservoir on its bracket and secure it using the nuts.

Op. 1072B50 AIR CHAMBER - R.R.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

2.2 JTS

Removing

- Position the vehicle on a lift.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

1. Disconnect the rapid connector for the intermediate fuel vapour pipe.

- Release the intermediate fuel supply pipe from the underbody fastenings.

1. Disconnect the rapid connector for the intermediate fuel vapour pipe.

2. Undo the bolts (2a) and move the engine coolant supply reservoir (2b) aside.

1. Undo the bolts (1a) and move the two electrical wiring mounting brackets (1b) aside.

- Release the intermediate fuel supply pipe from the fastenings on the engine compartment bulkhead and remove.

Refitting

- Place the intermediate fuel vapour pipe in its housing and secure it to the fastenings in the engine compartment.

- Refit both electrical connecion brackets in their seats and secure with bolts.

- Fit the engine cooling radiator in place and secure it using the bolts.

- Connect the rapid connector for the intermediate fuel vapour pipe.

- Secure the intermediate fuel supply pipe with the underbody fastenings.

- Connect the rapid connector for the intermediate fuel vapour pipe.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

- Remove the vehicle from the lift.