Inlet manifold - r + r and replace seal
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Inlet and exhaust manifolds › Inlet manifold - r + r and replace seal
‹ Prev Hoses connecting air intake chamber to intake manifold(s) - r.r.Next › Throttle shaft control valve for inlet ports r r
EngineInlet manifold - r + r and replace seal
INLET MANIFOLD - R + R AND REPLACE SEAL
- On this car, it is not possible to remove/refit the intake manifold on the car.
To perform this operation, the power unit must be removed/refitted
Op. 1004B10 POWER UNIT WITH MANUAL GEARBOX - R.R
and then the operation must be carried out at the bench, customising the operation according to the engine service procedures.
‹ Prev Hoses connecting air intake chamber to intake manifold(s) - r.r.Next › Throttle shaft control valve for inlet ports r r
Parts & tools for this job For 2005 Alfa Romeo Brera
- PARTExhaust gasketSearch: Alfa Romeo Brera 2005 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.