Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis
23 · Diagnostics

Windscreen wiper noisy

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Noise / vibrations › Windscreen wiper noisy
Fault diagnosisWindscreen wiper noisy

WINDSCREEN WIPER NOISY

Test results
0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION
Lift the wper arms off the glass, turn on the panel and select one of the functions (e.g. intermittence) to see whether the noise persists.Move on to Step 1The noise is no longer present.

Replace the wiper blades and/or wiper arms.

Op. 5050B28 WINDSCREEN WIPER BLADE/S - R+R

Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R

1CHECK THE WIPER IS CORRECTLY FASTENEDALL OKPROBLEMS ENCOUNTEREDACTION

Turn off the function selected previously using the stalk command and turn off the panel. Then remove the wiper arms and panel to ensure the windscreen wiper is correctly fastened to the body.

Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R

Move on to Step 2Incorrect fastening of the windscreen wiper.Restore the correct fastening of the windscreen wiper.
2CHECK THE WINDSCREEN WIPER LINKAGEALL OKPROBLEMS ENCOUNTEREDACTION

Turn off the instrument panel and check the linkage movement is correct, in particular:

  • ensure the linkage does not interfere with the body or is hindered by foreign bodies present in the wiper housing;
  • check that the windscreen wiper unit has been correctly assembled.
End of diagnosis1. The linkages interfere with the body.1. Restore the linkages to correct working order.
2. Foreign bodies present in the windscreen wiper housing.2. Remove the foreign bodies from the windscreen wiper housing.
3. Incorrect assembly of the windscreen wiper.

3. Replace the windscreen wiper unit

Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR

Parts & tools for this job For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.