Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis
23 · Diagnostics

Fuel odours from the boot

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Odours › Fuel odours from the boot
Fault diagnosisFuel odours from the boot

FUEL ODOURS FROM THE BOOT

2.2 JTS, 3.2 JTS

When the vehicle is moving there is a smell of fuel, especially after refilling, coming from the rear area.

0PRELIMINARY CHECKSAll OKProblems encounteredOperation
First of all, check that there are no leaks from or damage to the fuel tankMove on to Step 1Leaks from the fuel tank

Restore the correct seal for the fuel tank. If necessary, replace it

Op. 1040A14 FUEL TANK - R + R FOR REPLACEMENT

1AIR OUTLET VENTS CHECKAll OKProblems encounteredOperation

Check the rear air outlet vents.

In particular, check:

- the positioning of the fins (they should open outwards)

- the correct fitting

Move on to Step 2Problems with the fitting

Restore the correct positioning of the vents

Op. 5010C60 LH OR RH REAR AIR OUTLET VENT (ONE) - R.R

2TANK BREATHER CHECKAll OKProblems encounteredOperation
Check that the fuel tank breather is correctly positionedMove on to Step 3Breather position incorrectRestore the correct position of the breather
3TANK FILLER CHECKAll OKProblems encounteredOperation

Check the tank filler. More specifically:

- seal of the filler housing in the wing

- condition of the filler

- seal of the cap

Move on to Step 4Filler faulty

Renew the filler. If necessary, replace it

Op. 1040A30 FUEL FILLER PIPE ASSEMBLY- R + R

Cap faulty

Replace the cap

Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R

4FUEL PUMP COVER CHECKAll OKProblems encounteredOperation
Check the seal of the fuel pump coverMove on to Step 5Seal worn

Replace the seal

Op. 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R

Cover damaged

Replace the cover

Op. 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R

5FUEL VAPOUR RECOVERY SYSTEM CHECKAll OKProblems encounteredOperation
Check the seal of the fuel vapour recovery systemMove on to Step 6Leaks from the fuel vapour recovery system

Tighten the connectors and bands. Replace any faulty components, if necessary.

Op. 1080E EVAPORATION CONTROL SYSTEM

6BOOT HOUSING SEAL CHECKAll OKProblems encounteredOperation
Check that the boot housing seal is correctMove on to Step 7Boot housing seal faultyCheck that the boot housing seal is correct
7UNDERBODY CHECKSAll OKProblems encounteredOperation
Check that the underbody plugs are present, in the area of the bootEnd of diagnosisNo underbody plugsFit the missing plugs

Parts & tools for this job For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.