Connect audio not working
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Radio and accessories etc.. › Connect audio not working
CONNECT AUDIO NOT WORKING
Audio not present from all sources (radio, CD, phone, navigation system)
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Connect to the Connect using the diagnostic equipment and check for the presence of any errors, also check that the radio controls on the steering wheel are working properly. | Move on to Step 2 | 1.Speaker wiring broken/short circuited | 1.Restore the correct wiring | |
| 2.Speakers defective | 2.Replace front speakers Op. 5570T90 FRONT SPEAKER (ONE), LEFT OR RIGHT - R.R or rear speakers | |||
| 3.Radio controls defective | 3. Restore the correct operation of the controls. | |||
| 2 | ELECTRICAL CONNECTION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Release the Connect from the dashboard and check that the connection with the speakers is properly fitted Check the audio controls on the steering wheel if present. | Move on to Step 3 | 1.Speaker output connection at the Connect not properly connected. | 1.Connect the connection correctly. | |
| 2.Audio controls on steering wheel defective. | 2.Restore the correct operation. | |||
| 3 | CHECK AUDIO SIGNALS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the presence of the audio signals see wiring diagram | Move on to Step 5 for versions without Bose system | Audio signals at the Connect output interrupted because the final audio stage is interrupted. | Replace Connect | |
| 3 | CHECK AUDIO SIGNALS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the presence of the audio signals see wiring diagram | Move on to Step 4 | Audio signals at the Connect output interrupted because the final audio stage is interrupted. | Replace Connect | |
| 4 | AUDIO AMPLIFIER CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check that the audio amplifier is correctly supplied by following See Test 5580PD | Move on to Step 5 | 1. Amplifier not correctly supplied | 1. Restore correct power supply. | |
| 2. Amplifier defective | 2. Replace audio amplifier | |||
| 3. Wiring defective between Connect and audio amplifier. | 3. Restore correct wiring. | |||
| 5 | CONNECT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that Connect is working properly | End of diagnosis |
Parts & tools for this job For 2005 Alfa Romeo Brera
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo Brera
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.