Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)02 · Specifications
02 · General

Lubricants

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Products › Lubricants
SpecificationsLubricants

LUBRICANTS

2.2 JTS3.2 JTS2.4 JTD 20v
Engine oil (*)SELENIA StAR - SAE 5W-40 - FIAT 9.55535-M2SELENIA WR - SAE 5W-40 - FIAT 9.55535-M2
Transmission fluidTUTELA CAR MATRYX - SAE 75W-85 - API GL 4
Idler unit (PTU) and rear differential fluidTUTELA CAR MULTI AXLE - SAE 75W-85 - API GL5

(*) For the correct operation of Multijet versions with DPF, only use the original type of lubricant.

If SAE 5W-40 non original products are used, lubricants with minimum ACEA A3 standards for petrol engines are acceptable, ACEA B4 for diesel engines; in this case the optimum engine performance is not guaranteed.

The use of products with lower specifications than ACEA A3 and ACEA B4 could cause damage to the engine not covered by the warranty.

Parts & tools for this job For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.