Emission control system
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Engine › Emission control system
Tightening torquesEmission control system
EMISSION CONTROL SYSTEM
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Catalyzer assembly to bodyshell mounting bracket | Bolt | M8 | 2.2 ÷ 2.7 | 3.2 JTS |
| Right rear Lambda sensor | M18 | 4.1 ÷ 5.0 | ||
| Left rear Lambda sensor | M18 | 4.1 ÷ 5.0 | ||
| Upper right Lambda sensor | M18 | 4.1 ÷ 5.0 | ||
| Upper left Lambda sensor | M18 | 4.1 ÷ 5.0 | ||
| E.G.R. system solenoid | Bolt | M8 | 2.3 ÷ 2.8 | 2.4 JTD 20V |
| E.G.R.system exhaust gas/ water heat exhange - cylinder head side | Bolt | M8 | 2.3 ÷ 2.8 | 2.4 JTD 20V |
| E.G.R.system exhaust gas/ water heat exhange - cylinder head side | Bolt | M8 | 2.3 ÷ 2.8 | 2.4 JTD 20V |
| Exhaust gas temperature sensor on particle filter | M14 | 4.5 | 2.4 JTD 20V | |
| Thermal coupling signalling catalytic converter overheating | M14 | 4.5 | 2.4 JTD 20V | |
| Pressure intake pipe downstream of particle filter | Connector | M8 | 1.2 ÷ 1.6 | 2.4 JTD 20V |
Parts & tools for this job For 2005 Alfa Romeo Brera
- PARTExhaust gasketSearch: Alfa Romeo Brera 2005 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.