WINDSCREEN ELIMINATE LEAKS

Operation 7035A04 · WINDSCREEN

After ascertaining the lcoation of the leak, remove one of the internal components covering the edge of the windscreen.

1. Wet with soapy water the external area where the leak occurs.

2. Blow compressed air from inside and identify the point of the leak.

If the leak is small, seal the relevant part from the inside and wait for the sealant to dry. Then repeat the test.

If the penetration is more extensive,

Op. 7035A14 OUTER WINDSCREEN MOULDING - R R.

Refit the removed parts.