Tailgate lock striker - r+r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Tailgate/flap › Tailgate lock striker - r+r
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Tail-gate lock motor - r r and check lock supply line
Body fittingsTailgate lock striker - r+r
TAILGATE LOCK STRIKER - R+R
Removing
Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R
1. Undo the bolts.
2. Remove the lock striker.
Refitting
Check that the lock striker is not damaged.
1. Position the lock striker.
2. Screw in the retaining bolts without tightening.
3. Place the striker in the correct position using the bolt slots. Permitted adjustment movements are indicated by arrows.
4. Tighten the fixing bolts.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | TAIL-GATE LOCK STRIKER | M6 | 0.8 |
Check that the striker and catch fit together properly and are aligned when the tailgate is closed.
Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R.
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Tail-gate lock motor - r r and check lock supply line
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Alfa Romeo touch up paint
- PARTPanel clip assortmentSearch: Alfa Romeo panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.