Rear brake disc guard - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Disc brakes › Rear brake disc guard - r r
REAR BRAKE DISC GUARD - R R
Removing
Position the vehicle on the ramp
Proceed with removal
Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE
Proceed with removal
Proceed with removal
Op. 3310B48 REAR BRAKE DISC - R R
1. Undo the bolt (1a) and remove the rear brake disc shield (1b).
Op. 4450D10 HUB OF ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED
Refitting
Place the rear brake disc shield back in its housing and fix it using the bolt.
Proceed with refitting
Op. 4450D10 HUB OF ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED.
Proceed with refitting
Op. 3310B48 REAR BRAKE DISC - R R.
Proceed with refitting
Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE.
Remove the car from the ramps.
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTRear brake padsSearch: Alfa Romeo GT 2003 rear brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.