Battery earth lead - r+r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Current generator › Battery earth lead - r+r
‹ Prev Electrolyte - check density and top up if necessaryNext › Lead between battery and starter motor - r+r
Electrical equipmentBattery earth lead - r+r
BATTERY EARTH LEAD - R+R
Removing
Ensure that the ignition key is in OFF position, then disconnect the earth lead from the battery.
| Name | Connector | |
|---|---|---|
| 1 | Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
1. Undo the nuts and disconnect the electrical connections from the battery earth lead terminal.
2. Disconnect the battery earth lead from the power unit.
| Name | Connector | |
|---|---|---|
| 2 | Battery earth on engine | See C2 BATTERY EARTH ON ENGINE ( BATTERY NEGATIVE ) |
3. Remove the battery earth lead.
Refitting
Place the battery earth lead back in its housing.
Connect the battery earth lead to the power unit.
Connect the electrical connections to the battery earth lead terminal and tighten the nuts.
Connect the earth lead terminal to the battery.
‹ Prev Electrolyte - check density and top up if necessaryNext › Lead between battery and starter motor - r+r
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.