LAMBDA SENSORS (ALL) - R.R.

Operation 1080B98 · EXHAUST EMISSION CONTROL SYSTEM

2.0 JTS

Removing

Position the vehicle on the ramp

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal

Op. 1080B92 LEFT UPPER LAMBDA SENSOR R R

Proceed with removal

Proceed with removal

Op. 1080B93 RIGHT UPPER LAMBDA SENSOR R R

Proceed with removal

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 1080B96 LEFT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R

Op. 1080B97 RIGHT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R

Refitting

Proceed with refitting

Op. 1080B97 RIGHT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R.

Proceed with refitting

Op. 1080B96 LEFT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with refitting

Op. 1080B93 RIGHT UPPER LAMBDA SENSOR R R.

Proceed with refitting

Op. 1080B92 LEFT UPPER LAMBDA SENSOR R R.

Connect the negative (-) battery terminal

Remove the car from the ramps.

1.8 T.SPARK

Removing

Proceed with the removal

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R.

Proceed with the removal

Op. 1080B60 ADDITIONAL AIR DELIVERY BY-PASS SOLENOID - R + R.

Proceed with the removal

Op. 1080B92 LEFT UPPER LAMBDA SENSOR R R.

Proceed with the removal

Op. 1080B93 RIGHT UPPER LAMBDA SENSOR R R.

Refitting

Proceed with the refitting

Op. 1080B93 RIGHT UPPER LAMBDA SENSOR R R.

Proceed with the refitting

Op. 1080B92 LEFT UPPER LAMBDA SENSOR R R.

Proceed with the refitting

Op. 1080B60 ADDITIONAL AIR DELIVERY BY-PASS SOLENOID - R + R.

Proceed with the refitting

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R.