Label not available
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Fuel tank and pipes › Label not available
LABEL NOT AVAILABLE
Removing
Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with the removal
Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R.
1. Undo the bolts (1a) and remove the inertia switch (1b) after having disconnected the electrical connection (1c).
| Description | Connector | |
|---|---|---|
| 1c | Inertia switch | See I50 INERTIAL SWITCH |
Refitting
Connect the electrical connection to the inertia switch.
Place the inertia switch in its housing and secure it using the bolts.
Proceed with the refitting
Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R.
Connect the negative battery terminal (-).
Removing
Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with the removal
Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R.
1. Undo the bolts (1a) and remove the inertia switch (1b) after having disconnected the electrical connection (1c).
| Description | Connector | |
|---|---|---|
| 1c | Inertia switch | See I50 INERTIAL SWITCH |
Refitting
Connect the electrical connection to the inertia switch.
Place the inertia switch in its housing and secure it using the bolts.
Proceed with the refitting
Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R.
Connect the negative battery terminal (-).
Removing
Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with the removal
Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R.
1. Undo the bolts (1a) and remove the inertia switch (1b) after having disconnected the electrical connection (1c).
| Description | Connector | |
|---|---|---|
| 1c | Inertia switch | See I50 INERTIAL SWITCH |
Refitting
Connect the electrical connection to the inertia switch.
Place the inertia switch in its housing and secure it using the bolts.
Proceed with the refitting
Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R.
Connect the negative battery terminal (-).
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 Battery |
- Undo the bolts (1a) and remove the inertia switch (1b) after having disconnected the electrical connection (1c).
| Description | Connector | |
|---|---|---|
| 1c | Inertia switch | See I50 INERTIAL SWITCH |
Refitting
- Connect the electrical connection to the inertia switch.
- Place the inertia switch in its housing and secure it using the bolts.
- Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R
- Connect the negative battery terminal (-).
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.