Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo GT Factory Service Manual (2003-2010)08 · Engine
08 · Engine

Exhaust manifold - r r

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Inlet and exhaust manifolds › Exhaust manifold - r r
EngineExhaust manifold - r r

EXHAUST MANIFOLD - R R

Operation 1072C12 · EXHAUST MANIFOLDS

1.8 T.SPARK

Removing

Position the vehicle on the ramp.

Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

NameConnector
BatterySee A1B BATTERY ( CONNECTORS )

Proceed with the removal

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R

Proceed with the removal

Op. 1080B40 CATALYTIC PRE-CONVERTER - R R

1. Undo the nuts (1a) and remove the exhaust manifold (1b) releasingi t from the studs on the cylinder head.

EXHAUST MANIFOLD - R R

Refitting

Place the exhaust manifold back in its housing and fix it tightening the nuts to the recommended torque.

FasteningComponentØ

Value

(daNm)

NutEXHAUST MANIFOLD/SM8(Cylinder head side) 2.3 ÷ 2.8

Proceed with the refitting

Op. 1080B40 CATALYTIC PRE-CONVERTER - R R

Proceed with the refitting

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD ON BULKHEAD - R+R

Connect the battery terminal (-).

Remove the car from the ramp.

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.