Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)22 · Fault diagnosis
22 · Diagnostics

Drift whilst braking

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Steering – vehicle behaviour › Drift whilst braking
Fault diagnosisDrift whilst braking

DRIFT WHILST BRAKING

During braking, the car pulls to the right and/or left

Results of the tests
1CHECK FOR OIL LEAKSAll OKProblems metOperation

Check that there are no fluid leaks from:

  • calipers;
  • master cylinder - condition of braking system
Continue to Step 2Fluid leak from a front caliper

Replace the faulty caliper Op.

Op. 3310A30 FRONT BRAKE CALIPER ONE R R

Fluid leak from a rear caliper

Replace the faulty caliper Op.

Op. 3310B36 REAR BRAKE CALLIPER - R R

2CHECK ON BRAKE WEARAll OKProblems metOperation
Check the state of wear of the brakes - condition of brake surfacesContinue to Step 3Brakes very wornOverhaul the brakes
Discs vitrified or with traces of greaseClean and check for causes
3CHECK ON WHEEL GEOMETRYAll OKProblems metOperation
Check the geometry and track of the wheel axleContinue to Step 4Front wheel geometry outside limits

Restore the correct front wheel geometry Op.

Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES FRONT WHEEL TOW-IN ADJUSTMENT IF NECESSARY

Rear wheel geometry incorrect

Restore the correct rear wheel geometry Op.

Op. 4450A40 REAR WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT

4CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket

Check that there are no faults in the ABS control unit

Continue to Step 5An error is detected in the control unitContinue following the instructions for the diagnostic equipment
Lack of dialogue with the control unitRestore the connection between the engine management control unit and the diagnostic connector See E7020 ABS
5CHECK ON DRIFTAll OKProblems metOperation

Disconnect the ABS control unit.

Check whether the vehicle still drifts during braking at variable speeds

Continue to Step 6Vehicle does not drift during braking

Replace ABS control unit Op.

Op. 3340A20 ABS ELECTRONIC CONTROL UNIT - R+R

6CHECK ON CORRECT OPERATIONAll OKProblems metOperation

Test the vehicle before delivery to the customer, checking that the fault is no longer present

The test is essential, as the braking system is a safety feature of the car

End of diagnosis

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.