1012 engine crankcase – engine crankcase
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- 10 engine › 1012 engine crankcase – engine crankcase
‹ Prev 1004 engine and power unit – crankcase and componentsNext › 1016 cylinder head/s – cylinder head
Manufacturing data and tolerances1012 engine crankcase – engine crankcase
1012 ENGINE CRANKCASE – ENGINE CRANKCASE
| Cylinder bore diameter (mm) | Validity | 
| ||
|---|---|---|---|---|
| Category B | Category A | Category C | ||
| 83.010 ÷ 83.020 | 83.000 ÷ 83.010 | 83.020 ÷ 83.030 | 2.0 JTS | |
| Cylinder liner diameter oversize (mm) | Validity | 
| ||
| 0.1 | 2.0 JTS | |||
| Flatness of cylinder head supporting surface (mm) | Validity | 
| ||
| < 0.1 | 2.0 JTS 3.2 V6 | |||
| Maximum permitted cylinder liner ovality (mm) | Validity | 
| ||
| < 0.005 | 2.0 JTS | |||
| Maximum permitted cylinder liner taper (mm) | Validity | |||
| < 0.010 | 2.0 JTS | |||
‹ Prev 1004 engine and power unit – crankcase and componentsNext › 1016 cylinder head/s – cylinder head
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.