Wheel geomety
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Rear suspension › Wheel geomety
SpecificationsWheel geomety
WHEEL GEOMETY
| 1.8 T.SPARK | 2.0 JTS | 3.2 V6 | 1.9-JTD 16v | |
|---|---|---|---|---|
| Camber | -35’ ± 20’ | -35’ ± 20’ | -1°21'' ± 20’ | -35'' ± 20’ |
| Toe in (d2-d1) | 3 ± 1 mm (*) (27’ ± 9’) | 3 ± 1 mm (*) (27’ ± 9’) | 2.4 ± 1 mm (*) (23’ ± 9’) | 3 ± 1 mm (*) (27’ ± 9’) |
The values are valid for the vehicle in Standard A or Standard 0 conditions, corresponding to the mass of the vehicle complete with spare wheel, tools, accessories, supplies with a full fuel tank or 8 litres of fuel.
(*) The toe in value, is calculated using a 15" wheel rim irrespective of the wheel size actually fitted; if it is not possible to use a 15" wheel on the test bench, refer to the original values. It should also be remembered that the toe in value includes the tolerance that should be equally distributed between the two wheels.
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Alfa Romeo GT 2003 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.