200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
Clutch Pedal Assembly: Service and Repair
Alloy pedal bracket
Note: Grease all bearing and contact sufaces with white lubricating paste (Part No. AOS 126 000 05).
CAUTION: The brake pedal path must not be shortened by excess carpeting.
CAUTION: If clutch pedal does not automatically return when the clevis is properly adjusted:
there is air in the hydraulic system and/or
The pedal or overcenter spring may not be moving freely
1 - Circlip
always replace
install on pedal bracket shaft
2 - Cirdip
always replace
install on bolt 9
3 - Clutch pedal
fixed in place by adjustment of clevis
install on pedal bracket shaft
bearing bushing is molded in, it can't be replaced
supplied aa replacement part with bearing bushing
4 - Circlip
always replace
install on bearing bolt
5 - Washer
install on pedal bracket shaft
6 - Overcenter spring
coat with white grease before installing
must not touch master cylinder hose
7 - Pedal bracket
8 - self-locking nut 25 Nm (18 ft lb)
always replace