audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Power and Ground Distribution > < Ignition Switch|Service and Repair|Page 3052
Page 1
background image

Starter Motor: Service and Repair

1.

Disconnect battery ground cable.

2.

Remove screws securing wiring harness connectors and nut securing positive battery cable and disconnect wires and cable from solenoid switch.

3.

Remove nuts or bolts securing starter to engine and remove starter motor from vehicle.

4.

Reverse procedure to install.

Power and Ground Distribution > < Ignition Switch|Service and Repair|Page 3052