5000CD Turbo (Canada) L5-2226cc 2.22L SOHC Turbo (MC) (1988)
^
remove adapter B from oil pressure gauge VW 1342
^
cut a length of clear plastic tubing
^
40 cm (16 in.) x 9.5 mm (3/8 in.) I.D.
^
insert adaptor B end, into tubing
^
secure with hose clamp
^
install adaptor B with attached tubing into engine block
^
thread end of adapter into oil pressure valve hole
^
fill plastic tube with engine oil
^
hold tube upright
^
tape to side of block, if necessary
^
wait 10 minutes for oil level to stabilize
^
mark level of oil in tubing
^
wait 20 minutes
^
if oil level falls below reference mark, replace leaking check valve
CAUTION
Part numbers are for reference only. Always check with you Parts Department for latest information.
^
check valve Part No. 077 103 175B
^
apply sealant D 000 600
^
tightening torque: 6 N-m (54 in.lb.)
^
reinstall oil pressure switch C