90 L5-2309cc 2.3L SOHC (NG) (1988)
Inspect subframe for visible damage before replacing bolts.
^
remove subframe bolt and washer 1
^
remove wax from threads of nut in body with brake cleaner or carburetor cleaner
^
dry threads with compressed air
^
install new bolt and washer
^
torque to 35 N-m (25 ft.lb.)
^
repeat above steps on remaining bolts/ washers/nuts 2, 3, and 4
Note
Only remove and replace one bolt/washer at a time.
^
with vehicle weight on suspension tighten each subframe bolt an additional 1/4 turn (use a vehicle ramp or drive-on hoist)
^
check control arm bolts for tightness and replace if loose
^
torque to 65 N-m (48 ft.lb.) with vehicle weight on suspension (use a vehicle ramp or drive-on hoist)