audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Water drain hoses > < Removing and installing sliding/tilting sunroof frame

A1

Removing and installing frame for guide plate
Removing and installing frame for guide plate
Removing
  Note
t  Before removing, mark position of frame.
t  A second person is required when removing the frame.
t  One person must loosen the bolted connections while a second holds the frame and takes it out of the vehicle.
–  Headliner removed → Rep. gr.70.
–  Trim panel for sunroof sun blind removed
   
–  Mark position of frame for guide plate -1- on sunroof frame using a felt-tip pen or similar.
  A60-10377
–  First unscrew rear bolts -arrows- from frame.
  Caution
Bolts -arrow A- remain fitted initially during removal.
  A60-10378
–  Remove bolts -arrows-.
–  Take hold of frame and only then unscrew bolts -arrow A-.
–  Lift frame out of vehicle through opened rear lid.
Installing
–  When installing, align frame according to marks and secure with bolts.
–  Tighten bolts alternately (from front to rear) to specified torque → Item.
  A60-10376

Water drain hoses > < Removing and installing sliding/tilting sunroof frame