audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Retrofitting storage net > < Removing and installing trim for storage net

A1

Removing and installing storage net
Removing and installing storage net
Special tools and workshop equipment required
   
t  Pop rivet tool -VAS 5072-
t  Drill
t  Bit Ø 3.2 mm
t  Safety goggles
  W00-1237
Removing
–  Remove the storage net trim → Chapter.
  WARNING
Risk of eye injury.
Wear safety goggles.
–  Carefully drill out the pop rivets -arrows- using a Ø 3.2 mm bit.
–  Detach the frame -1- with the storage net.
Installing
Install in reverse order, paying attention to the following:
–  Use the pop rivet tool -VAS 5072- to rivet the frame with storage net to the centre console.
Notes on installation: For example tightening torques, component replacement → Chapter.
  A68-10529

Retrofitting storage net > < Removing and installing trim for storage net