A1
Exploded view of modular wire routing |
1 - | Rear wire holder |
q | Clip on until heard to engage |
2 - | Front seat |
3 - | Wiring harness |
q | Do not twist inserted wires |
4 - | Corrugated tube upper shell |
q | Must end flush with rear wire holder |
5 - | Cable tie |
q | Re-attach in the same position |
6 - | Corrugated tube lower shell |
q | Must end flush with rear wire holder |
7 - | Front wire holder |
q | Clip on until heard to engage |