–
| Move the front seat as far back and upwards as it will go. |
–
| Use a rubber or plastic-headed hammer to knock the seat fore-and-aft adjustment handle -1- off the handle mount -2-. |
Note For ease of illustration, the seat fore-and-aft adjustment handle is shown turned through 180°. |
–
| Push the seat fore-and-aft adjustment handle onto the handle mount. |
Caution When knocking on the seat fore-and-aft adjustment handle, take care not to damage the surface. |
|
–
| Use a rubber hammer to knock home the seat fore-and-aft adjustment handle on the handle mount. |
Notes on installation: For example tightening torques, component replacement → Chapter. |
|
|
|