t
| Make sure that no brake fluid escapes onto the gearbox. If this does happen, clean the affected area thoroughly. |
t
| Place a cloth underneath to catch escaping brake fluid. |
–
| Release clip -3- with a screwdriver and disconnect pipe/hose assembly -1- from connection -4-. |
–
| Detach pipe/hose assembly from bracket and remove. |
Caution Risk of brake fluid escaping. |
Do not press clutch pedal after removing clutch slave cylinder. |
|
Installation is carried out in reverse sequence; note the following: |
–
| Connect pipe/hose assembly to clutch master cylinder and clutch slave cylinder → Fig.. |
|
|
|