A1
Exploded view - LuK version clutch with one-piece flywheel |
1 - | Flywheel |
q | Removing and installing → Engine, mechanics; Rep. gr.13 |
q | Ensure that dowel pins fit tightly |
q | Contact surface for clutch lining must be free of grooves, oil and grease |
2 - | Clutch plate |
q | For correct version, refer to → Electronic parts catalogue |
q | Installation position → Fig. |
q | Removing and installing → Chapter |
3 - | Pressure plate |
q | For correct version, refer to → Electronic parts catalogue |
q | Removing and installing → Chapter |
q | Checking ends of diaphragm spring → Fig. |
q | Checking spring connections and rivets → Fig. |
4 - | Bolt |
q | M6 - 13 Nm |
q | M7 - 20 Nm |
q | 6x |
q | Loosen and tighten bolts consecutively in steps of 90° |